The network tester & cable tester M-CT-430A can be used for network cable project installation and maintenance, computer room detection, maintenance and CCTV system installation.
2.4 inch TFT-LCD screen, 320x240 resolution
Combined network ping testing, port flashing, and IP address scan
Quickly identify connected network port speed (10/100/ 1000M), and detect duplex mode (full or half)
Cable tracer can search and identify the correct UTP or BNC cable in a bundle
Secondary code digital mode decisively rejects noise and false signals to locate cables quickly and easily.
RJ45 cable TDR tests UTP cable status, length and attenuation
Advanced UTP cable test for cable sequence, type and connectivity, near-end, mid-end and far-end fault point of RJ45 cable plug
Includes cable tracer (batteries not included), AC adaptor/charger, 3.7V Li-on battery, RJ11 patch cable, RJ45 patch cable and tool bag
Specification:
|
Model number
|
M-CT-430A
|
| LCD Display
|
2.4 inch
TFT-LCD screen, 320x240 resolution
|
| Cable test and cable tracer
|
UTP cable
test
|
Test UTP
cable´s sequence, type and remote kit, quickly detect the near-end, mid-end
and far-end fault point of RJ45 cable connector
|
| Cable type
|
RJ45 Twisted
pair, RJ11 telephone line, BNC cable etc.
|
| The fault of
RJ45 cable connector
|
Can
determine the fault point of RJ45 cable connector from LOCAL/Remote indicator
light
|
| RJ45 TDR cable test
|
Test cable pair status, length, attenuation, reflectivity, impedance, skew, etc. Measurement range 180M
|
| Port flashing
|
Can search the
Ethernet switch port which connect the meter
|
| Ping test
|
Check whether IP
camera or other network equipment’s Ethernet port is working normally, the IP
address whether is correct.
|
| IP Scan
|
Quickly find the
IP address of the IP camera or other network equipment which connected to the
meter
|
| Link Monitor
|
Quickly identify
the connected network port (10/100/ 1000M) and duplex mode (full duplex /
half duplex).
|
| External power supply
|
DC 5V/1A
|
| Battery
|
Built-in 3.7V Lithium Ion
battery, 2000mAh. The cable Receiver battery: two AA batteries
|
| Rechargeable
|
After charging 3 hours,
normal working time 16 hours
|
| Auto off
|
1-30 (mins)
|
| Working Temperature
|
-10℃ --- +50℃
|
| Working Humidity
|
30%-90%
|
| Dimension/Weight
|
126mm x 83mm x 33mm /
0.34kg
|
