中文版 | English
    Cable Tester

           


The product M-CT-430B can be used for network cable project installation and maintenance, computer room detection, maintenance and CCTV system installation.

2.4 inch TFT-LCD screen, 320x240 resolution

Combined network ping testing, port flashing, and IP address scan

Quickly identify connected network port speed (10/100/ 1000M), and detect duplex mode (full or half)

Cable tracer can search and identify the correct UTP or BNC cable in a bundle

Secondary code digital mode decisively rejects noise and false signals to locate cables quickly and easily.

RJ45 cable TDR tests UTP cable status, length and attenuation

Advanced UTP cable test for cable sequence, type and connectivity, near-end, mid-end and far-end fault point of RJ45 cable plug

HD Coaxial video level meter, can detect the TVI/CVI/AHD/CVBS signal peak value, SYNC value and burst value

Built-in TDR tests for opens, shorts and length (1.2km max) on UTP, CAT 6e/5e, BNC and telephone line cable

Includes cable tracer (batteries not included), AC adaptor/charger, 3.7V Li-on battery, BNC to alligator clip adaptor, RJ11 patch cable, RJ45 patch cable and tool bag


Specification:

Model number

                  M-CT-430B

LCD Display

2.4 inch TFT-LCD screen, 320x240 resolution

Cable test and cable tracer

UTP cable test

Test UTP cable´s sequence, type and remote kit, quickly detect the near-end, mid-end and far-end fault point of RJ45 cable connector

Cable type

RJ45 Twisted pair, RJ11 telephone line, BNC cable etc.

The fault of RJ45 cable connector

Can determine the fault point of RJ45 cable connector from LOCAL/Remote indicator light

RJ45 TDR cable test

Test cable pair status, length, attenuation, reflectivity, impedance, skew etc. measurement range 180M

TDR Cable Test

Tests for opens, shorts and length (1.2km max) on UTP, CAT 6e/5e, BNC and telephone line cable

Port flashing

Can search the Ethernet switch port which connect the meter

Ping test

Check whether IP camera or other network equipment’s Ethernet port is working normally, the IP address whether is correct.

IP Scan

Quickly find the IP address of the IP camera or other network equipment which connected to the meter

Link Monitor

Quickly identify the connected network port (10/100/ 1000M) and duplex mode (full duplex / half duplex).

External power supply

DC 5V/1A

Battery

Built-in 3.7V Lithium Ion battery, 2000mAh. The cable Receiver battery: two AA batteries

Rechargeable

After charging 3 hours, normal working time 16 hours

Video Level Meter

Detects the peak, sync and burst level of TVI, CVI, AHD, CVBS video signals in real time

Working Temperature

-10---+50

Working Humidity

30%-90%

Dimension/Weight

126mm x 83mm x 33mm / 0.32kg